Leak Sensor and Solarwinds Orion

THerbekTHerbek
in InfraSensing Sensors
I have a SensorGateway (firmware 9.2.0-STD (Apr 4 2024)) with a single leak sensor. I have Solarwinds Orion MIB database updated to version 1.5.0.60121.

I've downloaded the only MIB database I can find from the Google machine: https://serverscheck.com/support/downloads.asp
Checking that .MIB file I can see that 1.3.6.1.4.1.17095.3.10.0 is the value I need and I've verified that with iReasoning MIB Browser.

But when I go to make the universal device puller in Orion, 3.10.0 is for a voltage setting. Please advise.

Comments

  • THerbekTHerbek
    I updated the Solarwinds MIB database to the latest 1.5.0.6.0126 version, but still the same issue
  • AdministratorAdministrator
    THerbek I recommend to reach out to Orion. If the iReasoning MIB Browser shows you the correct value, then the issue is within the way Orion deals with the info.
  • THerbekTHerbek
    Ticket has been opened and I will report back with what they say. Is this link the most up to date MIB file? https://infrasensing.com/support/downloads.asp
  • adminadmin
    Yes, the MIB file available at that link is up to date.
  • THerbekTHerbek
    I have a resolution to this post.

    After opening a ticket with Solarwinds, they told me that even if Orion's MIB Browser does not line up with MIB file of the device, you can still create a universal device poller with the correct OID.
    Finding the correct OID is the tricky part. I was able to use SNMPwalk that's built into Solarwinds (C:\Program Files (x86)\SolarWinds\Orion\SNMPWalk.exe) and with a lot of trial and error determined that 1.3.6.1.4.1.17095.8.3.4.0 was the right OID for me. That displays an integer, 0 for dry, 1 for wet.
    Orion's UDP also defaults to SNMP type GET NEXT which throws it off by one. That is frustrating. Changed that type to GET and it will give you the bang on value you are wanting.

    After that adventure, I'm now able to poll whether my sensor is dry or wet and alert on it accordingly.

    Thank you all for the help and I hope this post helps some poor soul like me just trying to check off an audit finding.
Sign In or Register to comment.